Servo press P512

High accuracy in press fit operations

Products Range

Nominal Thrust Model Stroke Data Sheet Drawing.PDF Drawing.Dxf Drawing.Stp
13kN P5124-0130-200-BA 200mm Download Download Download Download
30kN P5124-0300-200-BA 200mm Download Download Download Download
30kN P5124-0300-325-BA 325mm Download Download Download Download
40kN P5124-0400-200-BA 200mm Download Download Download Download
40kN P5124-0400-325-BA 325mm Download Download Download Download
60kN P5124-0600-200-BA 200mm Download Download Download Download
60kN P5124-0600-325-BA 325mm Download Download Download Download

Download the catalogue ➦ 

Servo Press P512

The servo press for high accuracy high accuracy in press fit

The Auloma P512 servo press module include the compact design with the extreme stiffness. The device results an high precision screw spindle with ram position fully controlled by the CPU built-in installed in the servo drive. The servo press P512 is particularly suitable to monitoring the productive process and for seeking the minimal process variation such as parts defects and process abnormalities. The servo press mount a ground ball screw executed according the standard ISO T1,this extreme precision allow a repeatability of the ram lesser at 0.005 mm. Thanks to the extreme stiffness the dispersion of the force trough the structure elasticity is ward off and the measure of the two magnitudes Force and Displacement result reliable and precise. This precision allow at the process monitoring to have a very accurate signature of processed parts.

servo press for pressing and joining

Servo Press P512 for high accuracy press fit applications

Servo PressP512 main features

  • High stiffness Ball Screw with twin nut preloaded
  • Oversized Roller Thrust bearing
  • Robust anti twist ram
  • Ram Feedback by Encoder Absolute multiturn 17 bits
  • Strain gauge force sensor
  • Force measure max error <±0.5% F.S.
  • Ram Repeatability <0.005 mm
  • High accuracy

Servo PressP512 Configuration

The servo press P512 is available with the strain gauge force sensor embedded in the press body. The range of the thrust capacity start from 13kN until 60kN and the standard stokes of 200 and 325mm is assumed as standard for each size, but Auloma is specialized in tailor made servo press ad is possible customised your device with different thrust capability and with whichever stroke with a value lesser than the standard. For all thrust and strokes values required out from our standard, included in a range between 13 to 60 kN and 100 to 325mm of stroke, the customisation is available without any additional development costs. Download the servo press configurator from the link below and send us to, compiled with all data, in two days our technical staff will be capable to provide you the data sheet of your tailor made servo press and quotation.
Download the Servo Press configurator

Servo PressP512 Force Measure

Very accurate force sensor to measure any force variation

strain gauge force sensor

Strain gauge force sensor embedded in Auloma servo press

A very accurate force measure allow at our process monitoring of analyse any process variation and seek in run parts defects and process abnormalities. The servo press P512 mount a strain gauge force sensor embedded in the body press capable of capturing any force effects through the press spindle. The maximum error of the system it is equal or lesser the 1% of the servo press full scale. The static behaviour of the strain gauge force sensor allow a precise measure of the forces also in rally variation. The main advantage of this solution consist in the high reliability of the sensor and its deflection is compensated by the APM software. To know better the potentiality of a servo press to seek parts defects visit our page Process Monitoring APM-BA

Servo Press Process Monitoring

How enhance your product quality

Servo press process monitoring working scheme

P512 servo presses are supported by the APM-BA process monitoring to control in real time the press operations. The APM (Auloma Process Monitoring) is a software suite developed to program two different press environment:

  • Press Cycle
  • Process Analysis

The suit is very flexible and allow to develop whichever drive profile you want to control your process for:

  • Press to position
  • Press to force
  • Press to relative position

and with a maximum of five break point in each recipe. The software APM-BA is installed in the APM-PLC, a CPU with the firmware dedicated for the scope and supplied by Auloma in the servo drive. Through the Ethernet connection is possible connect whichever PC with the operative system MS Windows Vista® or later versions, where is installed our APM-PC ToolKit. In Few minutes, follow step by step the instructions is possible set-up the press drive profile and the relative force limits for set-up the process monitoring. In the APM-PLC can be stored only one recipes .The data gathered by APM-BA from the servo presses are processed in real time and provide through the network of discrete I/O a feedback to the user's PLC about the analysis results, OK or NOK parts. through Etehernet TCP/IP network, the analysis data can be provided in CSV format to be analysed and stored in a hosted PC with our APM-PC Toolkit installed or with the almost MERP, ERP, Spread sheet available in the market. Thanks to the APM Auloma Process Monitoring your productive press process will be controlled in run and parts defects or process abnormalities will be sought in real time. To know more about APM-BA for servo presses visit the own web page:
Process Monitoring APM-BA

Servo press P512


  • Assembly
  • Press Fit
  • Inserting
  • Spring Test
  • Pressing
  • Straightening
  • Riveting
  • Clinching
  • Flaring
  • Marking
  • Crimping
  • Coining
  • Bending
  • Clamping

Servo press P512


  • Automotive power-train
  • Automotive components
  • Appliances
  • Electronics
  • Electromechanics
  • OEM
  • Watches
  • Defence
  • Aeronautics
  • Medical
  • Weapons
  • Heart Mover
  • Energy

Servo press P512


  • Implementation cost reduction
  • Lower maintenance
  • Energy cost saving
  • Process analysis
  • Defects and abnormalities seeking
  • Parts traceability

Servo pressP512


  • Force Accuracy ±0.5%FS
  • Ram Repeatability ±0.005mm
  • Steel Made
  • APM-BA Pressing Monitoring
  • IP 62
  • ABB® or Bosch® Hardware