The Auloma P512 servo press module include the compact design with the extreme stiffness. The device results an high precision screw spindle with ram position fully controlled by the CPU built-in installed in the servo drive. The servo press P512 is particularly suitable to monitoring the productive process and for seeking the minimal process variation such as parts defects and process abnormalities. The servo press mount a ground ball screw executed according the standard ISO T1,this extreme precision allow a repeatability of the ram lesser at 0.005 mm. Thanks to the extreme stiffness the dispersion of the force trough the structure elasticity is ward off and the measure of the two magnitudes Force and Displacement result reliable and precise. This precision allow at the process monitoring to have a very accurate signature of processed parts.
|Nominal Thrust||Model||Stroke||Data Sheet||Drawing.PDF||Drawing.Dxf||Drawing.Stp|
The servo press P512 is available with the strain gauge force sensor embedded in the press body. The range of the thrust capacity start from 13kN until 60kN and the standard stokes of
200 and 325mm is assumed as standard for each size, but Auloma is specialized in tailor made servo press ad is possible customised your device with different
thrust capability and with whichever stroke with a value lesser than the standard. For all thrust and strokes values required out from our standard, included in a range between
13 to 60 kN and 100 to 325mm of stroke, the customisation is available without any additional development costs. Download the servo press configurator from the link below and send us
to firstname.lastname@example.org, compiled with all data, in two days our technical staff will be capable to provide you the data sheet of your
tailor made servo press and quotation.
Download the Servo Press configurator ➦
A very accurate force measure allow at our process monitoring of analyse any process variation and seek in run parts defects and process abnormalities. The servo press P512 mount a strain gauge force sensor embedded in the body press capable of capturing any force effects through the press spindle. The maximum error of the system it is equal or lesser the 1% of the servo press full scale. The static behaviour of the strain gauge force sensor allow a precise measure of the forces also in rally variation. The main advantage of this solution consist in the high reliability of the sensor and its deflection is compensated by the APM software. To know better the potentiality of a servo press to seek parts defects visit our page Process Monitoring APM ➦
P512 servo presses are supported by the APM process monitoring to control in real time the press operations. The APM (Auloma Process Monitoring) is a software suite developed to program two different press environment:
The suit is very flexible and allow to develop whichever drive profile you want to control your process for:
and with a maximum of five break point or twohundred and fiftyfour in each recipe. The software APM is installed in the APM-PLC, a CPU with the firmware dedicated for the scope and supplied by Auloma in the
servo drive. Through the Ethernet connection is possible connect whichever PC with the operative system MS Windows Vista® or later versions, where is installed our APM-PC ToolKit.
In Few minutes, follow step by step the instructions is possible set-up the press drive profile and the relative force limits for set-up the process monitoring. In the APM-PLC can be
stored only one recipes .The data gathered by APM from the servo presses are processed in real time and provide through the network of discrete I/O a feedback to the user's PLC about
the analysis results, OK or NOK parts. through Etehernet TCP/IP network, the analysis data can be provided in CSV format to be analysed and stored in a hosted PC with our APM-PC Toolkit
installed or with the almost MERP, ERP, Spread sheet available in the market. Thanks to the APM Auloma Process Monitoring your productive press process will be controlled in run and
parts defects or process abnormalities will be sought in real time. To know more about APM for servo presses visit the own web page:
Process Monitoring APM ➦